k plunger piston pump with warranty

Maximum vacuum flow rate: n/a working pressure: 280 bar, 4000 psi Technology: Hydraulics Current Speed: 250 L/min, 66 gal/min Displacement: 140 cm3/rev, 8.5 inch3/rev Valve body material: cast iron Drainage options: Yes Including supply pump: No Circuit path: normally open Configuration: Single/Serial/Multiple, Tandem, Multiple Control method: pressure limiter | load sensitive | electronic control | unloading | proportional | fan drive, Load Sense, Electronic Control,

Maximum vacuum flow rate: n/a working pressure: 250 bar, 3600 psi Technology: Hydraulics Current Speed: 115 L/min, 30.4 gal/min Displacement: 48 cm3/rev, 2.9 inch3/rev Valve body material: cast iron Drainage options: Yes Including supply pump: No Circuit path: normally open Configuration: Single/Serial/Multiple, Tandem, Multiple Control method: pressure limiter | load sensitive, Load Sense, Torque Limiting Energy recovery capability: No Including filters: No Used together

Maximum vacuum flow rate: n/a working pressure: 250 bar, 3600 psi Technology: Hydraulics Current Speed: 115 L/min, 30.4 gal/min Displacement: 48 cm3/rev, 2.9 inch3/rev Valve body material: cast iron Drainage options: Yes Including supply pump: No Circuit path: normally open Configuration: Single/Serial/Multiple, Tandem, Multiple Control method: pressure limiter | load sensitive, Load Sense, Torque Limiting Energy recovery capability: No Including filters: No Used together

Maximum vacuum flow rate: n/a working pressure: 250 bar, 3600 psi Technology: Hydraulics Current Speed: 115 L/min, 30.4 gal/min Displacement: 48 cm3/rev, 2.9 inch3/rev Valve body material: cast iron Drainage options: Yes Including supply pump: No Circuit path: normally open Configuration: Single/Serial/Multiple, Tandem, Multiple Control method: pressure limiter | load sensitive, Load Sense, Torque Limiting Energy recovery capability: No Including filters: No Used together

General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity

General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity

General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity

General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity

General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity