parker piston pump with warranty

General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity

General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity

General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity

General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity

General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity

Used in conjunction with fluid types: Standard Hydraulic Fluids, Phosphate-ester, Water-Glycol Weight: 40 to 110 lb, 18 to 50 kg Control method: Pressure Limiter, Load Sense, Torque Limiting Maximum displacement: 6.1 inch3/rev, 100 cm3/rev Radial load capacity: 230 lb, 104 kg Direct drive capability: Yes Including filters: No Maximum flow rate: 260 L/min, 69 gal/min Medium: Hydraulic Fluids Installation plan: SAE to configure: Tandem, Single, Multiple Port type: Straight

Used in conjunction with fluid types: Standard Hydraulic Fluids, Phosphate-ester, Water-Glycol Weight: 40 to 110 lb, 18 to 50 kg Control method: Pressure Limiter, Load Sense, Torque Limiting Maximum displacement: 6.1 inch3/rev, 100 cm3/rev Radial load capacity: 230 lb, 104 kg Direct drive capability: Yes Including filters: No Maximum flow rate: 260 L/min, 69 gal/min Medium: Hydraulic Fluids Installation plan: SAE to configure: Tandem, Single, Multiple Port type: Straight

Used in conjunction with fluid types: Standard Hydraulic Fluids, Phosphate-ester, Water-Glycol Weight: 40 to 110 lb, 18 to 50 kg Control method: Pressure Limiter, Load Sense, Torque Limiting Maximum displacement: 6.1 inch3/rev, 100 cm3/rev Radial load capacity: 230 lb, 104 kg Direct drive capability: Yes Including filters: No Maximum flow rate: 260 L/min, 69 gal/min Medium: Hydraulic Fluids Installation plan: SAE to configure: Tandem, Single, Multiple Port type: Straight

Used in conjunction with fluid types: Standard Hydraulic Fluids, Phosphate-ester, Water-Glycol Weight: 40 to 110 lb, 18 to 50 kg Control method: Pressure Limiter, Load Sense, Torque Limiting Maximum displacement: 6.1 inch3/rev, 100 cm3/rev Radial load capacity: 230 lb, 104 kg Direct drive capability: Yes Including filters: No Maximum flow rate: 260 L/min, 69 gal/min Medium: Hydraulic Fluids Installation plan: SAE to configure: Tandem, Single, Multiple Port type: Straight