plunger pump with warranty

Maximum vacuum flow rate: n/a working pressure: 280 bar, 4000 psi Technology: Hydraulics Current Speed: 250 L/min, 66 gal/min Displacement: 140 cm3/rev, 8.5 inch3/rev Valve body material: cast iron Drainage options: Yes Including supply pump: No Circuit path: normally open Configuration: Single/Serial/Multiple, Tandem, Multiple Control method: pressure limiter | load sensitive | electronic control | unloading | proportional | fan drive, Load Sense, Electronic Control,

Product Description Specification itemvalueWarranty1 yearsShowroom LocationNoneBrand NameHengmeisiPlace of OriginChinaHubeiPressurestandardStructurestandardWeightPowerstandardDimension(L*W*H)standardDisplacementOtherMaximum Flow Ratestandard Packing & Delivery Standard export packing or according to customer requirements Company Profile The company specializes in the production of hydraulic station, hydraulic cylinder, axial piston pump, vane pump, gear pump, hydraulic motors

Maximum vacuum flow rate: n/a working pressure: 280 bar, 4000 psi Technology: Hydraulics Current Speed: 250 L/min, 66 gal/min Displacement: 140 cm3/rev, 8.5 inch3/rev Valve body material: cast iron Drainage options: Yes Including supply pump: No Circuit path: normally open Configuration: Single/Serial/Multiple, Tandem, Multiple Control method: pressure limiter | load sensitive | electronic control | unloading | proportional | fan drive, Load Sense, Electronic Control,

Maximum vacuum flow rate: n/a working pressure: 250 bar, 3600 psi Technology: Hydraulics Current Speed: 115 L/min, 30.4 gal/min Displacement: 48 cm3/rev, 2.9 inch3/rev Valve body material: cast iron Drainage options: Yes Including supply pump: No Circuit path: normally open Configuration: Single/Serial/Multiple, Tandem, Multiple Control method: pressure limiter | load sensitive, Load Sense, Torque Limiting Energy recovery capability: No Including filters: No Used together

Maximum vacuum flow rate: n/a working pressure: 250 bar, 3600 psi Technology: Hydraulics Current Speed: 115 L/min, 30.4 gal/min Displacement: 48 cm3/rev, 2.9 inch3/rev Valve body material: cast iron Drainage options: Yes Including supply pump: No Circuit path: normally open Configuration: Single/Serial/Multiple, Tandem, Multiple Control method: pressure limiter | load sensitive, Load Sense, Torque Limiting Energy recovery capability: No Including filters: No Used together

Maximum vacuum flow rate: n/a working pressure: 250 bar, 3600 psi Technology: Hydraulics Current Speed: 115 L/min, 30.4 gal/min Displacement: 48 cm3/rev, 2.9 inch3/rev Valve body material: cast iron Drainage options: Yes Including supply pump: No Circuit path: normally open Configuration: Single/Serial/Multiple, Tandem, Multiple Control method: pressure limiter | load sensitive, Load Sense, Torque Limiting Energy recovery capability: No Including filters: No Used together

General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity

General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity

General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity