HydraulicPressure Piston Pump P1140PSO2SRS5BC00S0000000
Maximum vacuum flow rate: n/a working pressure: 280 bar, 4000 psi Technology: Hydraulics Current Speed: 250 L/min, 66 gal/min Displacement: 140 cm3/rev, 8.5 inch3/rev Valve body material: cast iron Drainage options: Yes Including supply pump: No Circuit path: normally open Configuration: Single/Serial/Multiple, Tandem, Multiple Control method: pressure limiter | load sensitive | electronic control | unloading | proportional | fan drive, Load Sense, Electronic Control,
High-performance Piston Pump 0306204 PVP16100C2N5310
Maximum vacuum flow rate: n/a working pressure: 250 bar, 3600 psi Technology: Hydraulics Current Speed: 115 L/min, 30.4 gal/min Displacement: 48 cm3/rev, 2.9 inch3/rev Valve body material: cast iron Drainage options: Yes Including supply pump: No Circuit path: normally open Configuration: Single/Serial/Multiple, Tandem, Multiple Control method: pressure limiter | load sensitive, Load Sense, Torque Limiting Energy recovery capability: No Including filters: No Used together
High-pressure Piston Pump 0264997 PVP16115CGJ
Maximum vacuum flow rate: n/a working pressure: 250 bar, 3600 psi Technology: Hydraulics Current Speed: 115 L/min, 30.4 gal/min Displacement: 48 cm3/rev, 2.9 inch3/rev Valve body material: cast iron Drainage options: Yes Including supply pump: No Circuit path: normally open Configuration: Single/Serial/Multiple, Tandem, Multiple Control method: pressure limiter | load sensitive, Load Sense, Torque Limiting Energy recovery capability: No Including filters: No Used together
Parker Piston Pump PV270R1K1T1N2CA
General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity
Parker Piston Pump PV270R1K1L1NTLC
General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity
Parker Piston Pump PV180R1L1T1NFWS
General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity
Parker Piston Pump PV180R1K1T1NYLC
General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity
Parker Piston Pump PV140L9G1T1NMFCK0074 PV140L9G1T1NMFC4445K0074 PV140L9G1T1NMFCK0074X5951
General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity
Parker Piston Pump PV270R1D3T1WFFZ PV270R1E1B4NFRP PV270R1E1E3NFPR PV270R1E1T1NFP
General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity
Parker Piston Pump PV140R1K4T1N00144 PV140R1K4T1VMMC PV140R1K4T1VMMC4445 PV140R1K4T1VMRW
General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity
Parker Piston Pump PV140R1K4C1NFPR PV140R1K4C1NUPR PV140R1K4C1NUPR4445
General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity
Parker Piston Pump PV140R1K4T1NMMC4445 PV140R1K4T1NMMZ PV140R1K4T1NMMZ4445 PV140R1K4T1NMRC PV140R1K4T1NMRC4445
General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity
Parker Piston Pump PV092R1K1T1WFWS PV092R1K1T1WMM1 PV092R1K1T1WMMC PV092R1K1T1WMRC PV092R1K4T1WMR1
General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity
Parker Piston Pump PV016R1K1T1NFHS PV016R1K1T1NFR1 PV016R1K1T1NFWS PV016R1K1T1NMM1 PV016R1K1T1NMMC
General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity
Parker Piston Pump PV180L1K1DFNUPMX5899 PV180L1K1DFNUPM4445X5899 PV180L1K1L1NUPR PV180L1K1L1NUPR4445
General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity
Parker Piston Pump PV180R1K1T1N2CC4445 PV180R1K1T1N2CCX5830 PV180R1K1T1N2CC4342X5830 PV180R1K1T1N2CCX5889
General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity
Parker Piston Pump PV140R9K1T1WSCCK0072 PV140R9K4T1NFFPK0088 PV140R9K4T1NZCBK0154 PV140R9K4T1WFRPX5918
General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity
Parker Piston Pump PV270R1L1B1NFR2+ PVAC1PCMN PV270R1L1M3NF PV PV270R1L1T1N001X5899 PV270R1L1T1WMFC
General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity
HydraulicPressure Piston Pump P2105R00C1C18TA20N43S1B4P
Pump Type: Piston, Variable Body Material: Cast Iron Configuration: Single, Multiple Displacement: 60 to 145 cm3/rev, 3.7 to 8.9 inch3/rev Operating Pressure: 320 bar, 350 bar, 4600 psi, 5000 psi Flow Rate: 362 L/min, 79 gal/min For Fluid Type: Standard Hydraulic Fluids, Synthetic Hydraulic Fluids, Fire Resistant, Biodegradable Media: Hydraulic Fluids, Liquids Maximum Operating Speed: 2200 to 2800 RPM Minimum Fluid Temperature: -40 F Maximum Fluid Temperature: 115 C, 239 F
Variable Piston Pump P3075R00C1C21LB20N00B2A1U
Pump Type: Piston, Variable Body Material: Cast Iron Configuration: Single, Multiple Displacement: 60 to 145 cm3/rev, 3.7 to 8.9 inch3/rev Operating Pressure: 320 bar, 350 bar, 4600 psi, 5000 psi Flow Rate: 362 L/min, 79 gal/min For Fluid Type: Standard Hydraulic Fluids, Synthetic Hydraulic Fluids, Fire Resistant, Biodegradable Media: Hydraulic Fluids, Liquids Maximum Operating Speed: 2200 to 2800 RPM Minimum Fluid Temperature: -40 F Maximum Fluid Temperature: 115 C, 239 F
Parker Piston Pump PV270R1K1T1NFT1
General Information Fluid recommendations Premium quality hydraulic mineral fluid is recommended, like HLP oils to DIN 51524 (part 2 & 3) or ISO6743/4 (HM & HV). Brugger-value recommended to be 30 N/mm2 minimum for general application and 50 N/ mm2 for heily loaded hydraulic equipment and fast cycling machines and/or high dynamic loads, measured in accordance with DIN 51 347-2. See also Document MSG30-3248/UK Parker Hydraulic Fluids. Viscosity The normal operating viscosity
Scan to add on WeChat