Variable Piston Pump PD045PB04SRS5AC00R100PB00
Maximum vacuum flow rate: n/a working pressure: 280 bar, 4000 psi Technology: Hydraulics Current Speed: 250 L/min, 66 gal/min Displacement: 140 cm3/rev, 8.5 inch3/rev Valve body material: cast iron Drainage options: Yes Including supply pump: No Circuit path: normally open Configuration: Single/Serial/Multiple, Tandem, Multiple Control method: pressure limiter | load sensitive | electronic control | unloading | proportional | fan drive, Load Sense, Electronic Control,




Maximum vacuum flow rate: n/a
working pressure: 280 bar, 4000 psi
Technology: Hydraulics
Current Speed: 250 L/min, 66 gal/min
Displacement: 140 cm3/rev, 8.5 inch3/rev
Valve body material: cast iron
Drainage options: Yes
Including supply pump: No
Circuit path: normally open
Configuration: Single/Serial/Multiple, Tandem, Multiple
Control method: pressure limiter | load sensitive | electronic control | unloading | proportional | fan drive, Load Sense, Electronic Control, Unloading, Proportiona, Fan Drive
Energy recovery capability: Yes
Including filters: No
Used together with fluid type: standard hydraulic oil
Maximum displacement: 140 cm3/rev, 8.5 inch3/rev
Maximum flow rate: 66 gal/min, 250 L/min
Maximum fluid temperature: 95 ° C, 200 °F
Minimum fluid temperature: -40 ° C- 40 °F
Maximum noise level: 83 dBA
Maximum operating pressure: 280 bar, 4000 psi
Radial load capacity: 160-594 lb-ft
Maximum working speed: 1800 RPM
Maximum kinematic viscosity: NA
Minimum kinematic viscosity: NA
Weight: 82 kg (Max), 180 lb (Max)
Medium: Hydraulic / Liquid, Hydraulic Fluids, Liquids
Installation plan: SAE | ISO |BSPP, ISO
Port connection: SAE | ISO | BSPP, ISO, BSPP
Port type: flange | straight thread, Straight Threaded
Port position: Side port | Rear port | Oppose port, Rear Ports, Opposing Ports
Pump type: plunger
Rotation direction: clockwise | counterclockwise, Counterclockwise
Sensor type: NA
Axis type: SAE | ISO |BSPP, ISO
Direct drive capability: Yes











